XCMG XQZ152 Sondaj Kulesi

DOWN THE HOLE DRILLING RIG
DRILL DEPTH: 35M
DRILL DIAMETER: 90-152MM
XCMG XQZ152 submersible drilling machine is suitable for open-pit mines, quarries, cement mines, etc. It can work in both soft rock and hard rock, and has an independent cooling system. It won't stall at 40 degrees in high temperature, and can be started with one button in low temperature conditions at high altitude and low temperature. The engine can be preheated.
The core configuration uses a 264 kilowatt Cummins engine and an Atlas two-stage screw air compressor, such an imported high-end configuration can provide 19.3 cubic meters of compressed gas per minute.
The standard drill rod length is 5 meters, and the storage capacity is 6 + 1, which can meet the 35-meter hole depth. Automatic rod change drilling can be realized, which can effectively reduce labor intensity. The maximum pulling force of the drill rod is 50 kilonewtons using the motor + chain propulsion method. Using high-strength double V-shaped aluminum alloy propulsion beam, good guidance, corrosion resistance, longer service life.
In complex geological conditions, it has excellent off-road capability, with a ground clearance of 4.2m, a maximum climbing angle of 25 degrees, and can easily handle various terrains. The cab has passed the anti-rockfall certification, and the cab is equipped with a PLC control system, a 8-inch touch screen LCD display, which can provide real-time information on the drilling machine's operation, automatic prevention of deviation holes, prevention of air strikes, and prevention of jamming, thus effectively reducing the loss of drilling tools.

Under complex working conditions, it can achieve drilling speed of 33.4 meters per hour and fuel consumption of only 31 liters per hour, which can be said to be highly efficient and save up to 15% to 20% of fuel. It was produced in 2024 and has only been used for more than 300 hours, which can be said to have a very high cost performance ratio. Welcome to consult.