Yeni Kontur 650 Coldplastic Yol Çizgi Makinesi

Kontur 650HPE is designed for horizontal road marking with one-component cold plastics and retroreflective glass beads. The machine can apply flat lines and two types of structured lines (with a random pattern or a systematic pattern).
The marking unit is equipped with two quick-release applicators to apply single and double lines. A different applicator is used for each line type.
Cold plastic is mixed with hardener in the dynamic agitator immediately before applying marking lines. The components are dispensed automatically by variable displacement pumps.
Plastic consumption depends on the marking type and structured line pattern and ranges from 1.5 to 6 kg/m2. The marking unit with an applicator and a glass bead gun is mounted on the right side of the machine. The changeover time to the left side is 30 min, if done by 2 people.
Cleaning of the agitator and applicators is controlled from the operator panel and requires minimal attention from the support workers.
Retroreflective glass beads are applied on the lines directly during marking with automatic glass bead guns through adjustable diffusers.
The machine must be transported to the site on a low-frame trailer with a load capacity of at least 3.5 tons.
The machine is designed for use on roads in Europe, Siberia, and Central Asia and has a CE marking.

Standard Configuration:
- One set of applicators for flat or structured lines;*
- Two glass bead guns;
- Marking control panel;
- Foot pedal duplicating the “Start” button on the marking control panel;
- Hydraulic agitator in the plastic tank;
- Roof-mounted flashing lights;
- Spotlight for the marking unit;
- Operator workplace light;
- Marking unit light;
- Rear platform for a support worker and road cones.

Options:
- Additional applicators for flat and structured lines;**
- 40 cm single flat line applicator;
- Hydraulic drive for raising/lowering the aiming device;
- Remote button duplicating the “Start” button on the marking control panel;
- Joystick for switching modes of the control panel;
- “Pass This Side” sign (700 mm) on a swing arm or “Detour” cluster sign;
- Hydraulic powered sweeper.

*Sizes of standard configuration applicators to be specified when ordering.
**Sizes and quantity of additional applicators to be specified when ordering.
Specification Kontur 650HPE
Engine type Diesel
Engine power output, 44kW
Engine power, 61HP
Engine capacity, 2434cm3
Approval EU Stage IIIA (TIER 3)
Compressor Piston
Maximum operating road gradient, 20%
Maximum gradeability, 30%
Transport speed, 12km/h
Glass bead tank , 100l
Glass bead tank, 160kg
Control panel screen diagonal, inches 5,7
Pre-set programs Up to 24
Marking material (main / optional) Cold plastic
Maximum marking speed, 5km/h
Marking material quantity, 820kg
Hardener, 30l
Flushing liquid, 30l
Fuel tank capacity, 60l
Oil tank capacity, 80l
Lines applied simultaneously 2
Number of guns (applicators, extruders) 2
Double line width, 100, 120, 150mm
Single line width, 100, 120, 150, 200, 240mm
Overall machine dimensions (L x W x H), m:
- Operating position 7,500 x 2,200 x 2,600
- Transport position 4,500 x 1,600 x 2,400
Dry weight, 2700kg
Unladen weight, 2850kg
Total weight, 3900kg